• 
  Nicolas Lauro, Arnaud Alzina, Benoit Nait-Ali, David Smith. Non-Uniform Drying Shrinkage in Robocasted Green Body Ceramic Products. Ceramics, 2024, 7 (3), pp.1122-1136. ⟨10.3390/ceramics7030073⟩. ⟨hal-04910766⟩
• 
  David Smith, Jorge Martinez Dosal, Siham Oummadi, Delphine Nouguier, Diana Vitiello, et al.. Neck formation and role of particle-particle contact area in the thermal conductivity of green and partially sintered alumina ceramics. Journal of the European Ceramic Society, 2022, 42 (4), pp.1618-1625. ⟨10.1016/j.jeurceramsoc.2021.11.034⟩. ⟨hal-04842489⟩
• 
  Nicolas Lauro, Arnaud Alzina, Benoit Nait-Ali, Philippe Michaud, Olivier Durand. Développement et calibration d'un modèle DEM/SPH pour le binder jetting de poudres céramiques. 16ème Colloque National en Calcul de Structures (CSMA 2024), CNRS; CSMA; ENS Paris-Saclay; CentraleSupélec, May 2024, Hyères, France. ⟨hal-04610926⟩
• 
  D. Hautcoeur, Yannick Lorgouilloux, Anne Leriche, M. Gonon, B. Nait-Ali, et al.. Thermal conductivity of ceramic/metal composites from preforms produced by freeze casting. Ceramics International, 2016, 42 (12), pp.14077 - 14085. ⟨10.1016/j.ceramint.2016.06.016⟩. ⟨hal-01876687⟩
• 
  Rana Al-Tahan, Richard Mayet, Patrice Duport, Nicolas Tessier-Doyen, Anne Aimable, et al.. Characterization of kaolinite aqueous suspensions by acoustophoresis: Influence of crystallinity and of the ratio between basal and lateral surface of grains. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 649, pp.129473. ⟨10.1016/j.colsurfa.2022.129473⟩. ⟨hal-04767572⟩
• 
  F.Z. Abir, M. Mesnaoui, Y. Abouliatim, L. Nibou, Tariq Labbilta, et al.. Effect of the addition of iron oxide on the microstructure of ye'elimite. Cement and Concrete Research, 2022, 151, pp.106625. ⟨10.1016/j.cemconres.2021.106625⟩. ⟨hal-04741848⟩
• 
  M. Singlard, A. Paillassa, L. Ferres, Cécile Pagnoux, Anne Aimable. Freeze granulation and spray drying of mixed granules of Al2O3. Powder Technology, 2022, 395, pp.280-289. ⟨10.1016/j.powtec.2021.09.044⟩. ⟨hal-04741821⟩
• 
  Steve Dave Wansi Wendji, Carlo Massobrio, Mauro Boero, Christine Tugene, Elena Levchenko, et al.. Quantitative assessment of the structure and bonding properties of 50VxOy-50P2O5 glass by classical and Born–Oppenheimer molecular dynamics. Journal of Non-Crystalline Solids, 2024, 634, pp.122967. ⟨10.1016/j.jnoncrysol.2024.122967⟩. ⟨hal-04703242⟩
• 
  Delphine Gourdonnaud, Julie Bourret, Vincent Pateloup, Lisa Giardi, Luc Picton, et al.. Linking formulation feedstock to printability by robocasting: a case study of eco-friendly alumina pastes. Open Ceramics, 2024, pp.100606. ⟨10.1016/j.oceram.2024.100606⟩. ⟨hal-04577735⟩
• 
  Jean-Marc. Bassat, Pierre-Marie Geffroy, Élise Bonnet, Romuald Frugier, Zonghao Shen, et al.. Recent advances in materials, shaping and characterization tools for efficient SOFC and SOEC devices operating at intermediate temperatures. 24th International Conference on Solid State Ionics, International Society for Solid State Ionics, Jul 2024, Londres, United Kingdom. ⟨hal-04757227⟩
• 
  Shintaro Minami, Pierre-Marie Geffroy, Isao Kagomiya, Yuki Yamaguchi, Yasunobu Mizutani, et al.. Chemical stability and oxygen transport properties of La1−xCaxFe1−yByO3−δ (with B = Co, Ni, Mg) perovskite membranes. Journal of Materials Research, 2021, 36 (6), pp.1241-1249. ⟨10.1557/s43578-021-00212-7⟩. ⟨hal-03400935⟩
• 
  Delphine Gourdonnaud, Vincent Pateloup, Anna Junger, Julie Bourret, Thierry Chartier, et al.. Correlation between filament deposition path, microstructural and mechanical properties of dense alumina parts printed by robocasting. Journal of the European Ceramic Society, 2024, 44 (2), pp.1027-1035. ⟨10.1016/j.jeurceramsoc.2023.09.067⟩. ⟨hal-04642136⟩
• 
  P.-M. Geffroy, H. Schubert, J. Günster, A. Zocca. Quantification of in-plane stress development during drying of tape-cast ceramic layers by cantilever deflection method. Journal of the European Ceramic Society, 2025, 45 (1), pp.116868. ⟨10.1016/j.jeurceramsoc.2024.116868⟩. ⟨hal-04730519⟩
• 
  Btissem Malek, Jerome Serp, Manuel Miguirditchian, Alexandre Maitre, Yann Lepetitcorps, et al.. Production of metallic titanium by electrowning in molten salts of titanium oxycarbide anode. International Conference on Titanium Powder Metallurgy 2021, Nov 2021, Paris, France. ⟨cea-04741722⟩
• 
  Kinga Sztymela, Fabrice Rossignol, Marguerite Bienia, Nicolas Zapp, Kristian Nikolowski, et al.. Fabrication of 3D silicon anode by inkjet printing: Opportunities and challenges. Journal of Energy Storage, 2024, 75, pp.109567. ⟨10.1016/j.est.2023.109567⟩. ⟨hal-04575003⟩
• 
  Ceren Yildirim, Fabien Devoize, Pierre-Marie Geffroy, Frédéric Dumas-Bouchiat, Johann Bouclé, et al.. Electrical and Optical Properties of CaTi1−yFeyO3−δ Perovskite Films as Interlayers for Optoelectronic Applications. Materials, 2022, 15 (19), pp.6533. ⟨10.3390/ma15196533⟩. ⟨hal-03788985⟩
• 
  Barbara Früh, Heidi M-L Andersen, Lisa Baldinger, Linnea Bark, Davide Bochicchio, et al.. Welfare and environmental impact of organic pig production. 2022, pp.126. ⟨hal-04673983⟩
• 
  Naima Boughazif, Fabien Gerschwitz, Julie Bourret, Gisèle Lecomte-Nana, André Lecomte, et al.. Ultrafine grinding of mica in organic medium for ink-jet printing process. Powder Technology, 2024, 442, pp.119868. ⟨10.1016/j.powtec.2024.119868⟩. ⟨hal-04673467⟩
• 
  Hélène Celerier, Jenny Jouin, Nicolas Tessier-Doyen, Sylvie Rossignol. Influence of various metakaolin raw materials on the water and fire resistance of geopolymers prepared in phosphoric acid. Journal of Non-Crystalline Solids, 2018, 500, pp.493-501. ⟨10.1016/j.jnoncrysol.2018.09.005⟩. ⟨hal-02104338⟩
• 
  Mouafon Mohamed, Dayirou Njoya, Mohamed Hajjaji, André Njoya, Gisèle Laure Lecomte-Nana, et al.. Effect of Porogenic Agent Type and Firing Temperatures on Properties of Low-Cost Microfiltration Membranes from Kaolin. Transactions of the Indian Ceramic Society, 2020, 79 (1), pp.1-12. ⟨10.1080/0371750X.2019.1692695⟩. ⟨hal-02862743⟩

135

1 193