K. L. Adams, B. Miller, and L. Rebenfeld, Forced in-plane flow of an epoxy resin in fibrous networks, Polymer Engineering and Science, vol.48, issue.20, pp.1434-1441, 1986.
DOI : 10.1002/pen.760262013

R. Avila and F. L. Matthews, An experimental investigation of the isothermal impregnation of fibrous preforms, Institute of Material Composite Division Proceedings of ECCM9, 2000.

C. Binétruy and J. Pabiot, Effects of fabrics architectural heterogeneities on effective and satured permeabilities in RTM, Proceedings of ICCM12 -Paris 5-9, p.682, 1999.

C. Boutin, Study of permeability by periodic and self-consistent homogenisation, European Journal of Mechanics - A/Solids, vol.19, issue.4, pp.603-632, 2000.
DOI : 10.1016/S0997-7538(00)00174-1

URL : https://hal.archives-ouvertes.fr/hal-00943756

J. Bréard, A. Saouab, and G. Bouquet, Mesure de la perméabilité spatiale d'un renfort tridimensionnel pour matériaux compositesàcomposites

A. C. Caba, R. B. Rattazzi, and A. C. Loos, Verification of a simulation model for resin film infusion of complex shaped composite structures, J. Rein. Plast. Comp, vol.18, issue.16, pp.1465-1477, 1999.

J. F. Delerue, E. Perrier, Z. Y. Yu, and B. Velde, New algorithms in 3d image analysis and their application to the measurement of a spatialized pore size disctribution in soils, Pys. Chem. Earth (A), issue.7, pp.24639-644, 1999.

S. Drapier and M. R. Wisnom, Finite-element investigation of the compressive strength of non-crimp-fabric-based composites, Composites Science and Technology, vol.59, issue.8, pp.1287-1297, 1999.
DOI : 10.1016/S0266-3538(98)00165-1

S. Drapier and M. R. Wisnom, A finite-element investigation of the interlaminar shear behaviour of non-crimp-fabric-based composites, Composites Science and Technology, vol.59, issue.16, pp.2351-2362, 1999.
DOI : 10.1016/S0266-3538(99)00091-3

Y. Henzel, J. Bréard, F. Trochu, and R. Blanlot, A standard characterisation of satured and unsatured flow behaviours in porous media, Proceedings of ICCM12 -Paris 5-9, p.690, 1999.

S. C. Joshi, X. L. Liu, Y. C. Lam, and J. Sheridan, Simulation of resin film infusion process using finite element / nodal control volume approach, Advanced Composite Letters, vol.8, issue.3, pp.101-104, 1999.

M. K. Kang, J. J. Jung, and W. I. Lee, Analysis of resin transfer moulding process with controlled multiple gates resin injection, Composites Part A: Applied Science and Manufacturing, vol.31, issue.5, pp.407-422, 2000.
DOI : 10.1016/S1359-835X(99)00086-X

S. Kaviany, Principle of heat transfert in porous media, 1991.

J. M. Kenny, A. Trivisano, and G. Molina, Mathematical modelling of resin transfer molding of composites for automotive applications, Proceedings of ICCM9 -Madrid, pp.513-515, 1993.

Y. C. Lam, S. C. Joshi, and X. L. Liu, Numerical simulation of the mould-filling process in resin-transfer moulding, Composites Science and Technology, vol.60, issue.6, pp.845-855, 2000.
DOI : 10.1016/S0266-3538(99)00192-X

S. T. Lim, M. K. Kang, and W. I. Lee, Modelling of void formation during resin transfer molding, Proceedings of ICCM12 - Paris 5-9, p.544, 1999.

T. S. Lundström, R. Stenberg, R. Bergström, H. Partanen, and P. Birkeland, Inplane permeability measurements : stability, repatability and reproductibility, Proceedings of ICCM12 -Paris 5-9, p.696, 1999.

F. Robitaille, A. C. Long, B. J. Souter, and C. D. Rudd, Permeability modelling of industrial preforms : simulations and practical aspects, Proceedings of ECCM9, 1999.

C. Shih and L. J. Lee, Effect of fiber architecture on permeability in liquid composite molding, Polymer Composites, vol.15, issue.5, pp.626-639, 1998.
DOI : 10.1002/pc.10136

M. A. Spaid and F. R. Phelan, Lattice Boltzmann methods for modeling microscale flow in fibrous porous media, Physics of Fluids, vol.9, issue.9, pp.2468-2474, 1997.
DOI : 10.1063/1.869392

V. P. Stavrov, E. I. Kremenevskaya, V. V. Stavrov, and V. M. Tkachev, Effect of the structure of a fibrous layer on its permeability for a nonlinearly viscous fluid, Mechanics of Composite Materials, vol.31, issue.No. 4, pp.554-563, 1997.
DOI : 10.1007/BF02256291

L. Trevino, K. Rupel, W. B. Young, M. J. Liou, and L. J. Lee, Analysis of resin injection molding in molds with preplaced fiber mats. I: Permeability and compressibility measurements, Polymer Composites, vol.24, issue.1, pp.20-29, 1991.
DOI : 10.1002/pc.750120105

K. Velten, Drag measurement and evaluation in impregnation processes, Institute of Material Composite Division Proceedings of ECCM9, 1999.

T. J. Walsh, C. T. Morse, O. O. Ochoa, and .. , Composite auto bumper : design and process evaluation Picture of a quadriaxial NC2 ([-45,0,45,90]) made up of dry carbon UD fabrics (Tenax HTS 5131/24k tows 150 g/m 2 ), stitching pitch 5mm×5mm : (a) -45 ? face and (b) 90 ? face, Proceedings of ICCM9 -Madrid, pp.252-259, 1993.