S. Drapier, A. Pagot, A. Vautrin, and P. Henrat, Influence of the stitching density on the transverse permeability of non-crimped new concept (N C2) multiaxial reinforcements : measurements and predictions, Comp. Sci. Technol, issue.15, pp.621979-1991, 2002.

A. J. Ahn and J. C. Seferis, Autoclave resin infusion process : analysis and prediction of content, Sampe Quarterly, vol.21, issue.2, pp.3-10, 1990.

S. C. Joshi, L. Xiao-lin, Y. C. Lam, and J. Sheridam, Simulation of resin film infusion process using finite element/nodal control volume approach, Adv.Compos. Letters, vol.8, issue.3, pp.101-104, 1999.

C. Williams, J. Summerscales, and S. Grove, Resin Infusion under Flexible Tooling (RIFT): a review, Composites Part A: Applied Science and Manufacturing, vol.27, issue.7, pp.517-524, 1996.
DOI : 10.1016/1359-835X(96)00008-5

D. C. Blest, S. Mckee, A. K. Zulkifle, and P. Marshall, Curing simulation by autoclave resin infusion, Composites Science and Technology, vol.59, issue.16, pp.2297-2313, 1999.
DOI : 10.1016/S0266-3538(99)00084-6

A. C. Caba, R. B. Rattazzi, and A. C. Loos, Verification of a simulation model for resin film infusion of complex shaped composite structures, J. Reinf. Plast. Compos, issue.16, pp.181465-1477, 1999.

M. Kaviany, Principles of heat transfer in porous media, 1995.

J. Bear, Dynamics of Fluids in Porous Media, Soil Science, vol.120, issue.2, 1988.
DOI : 10.1097/00010694-197508000-00022

K. L. Adams, B. Miller, and L. Rebenfeld, Forced in-plane flow of an epoxy resin in fibrous networks, Polymer Engineering and Science, vol.48, issue.20, pp.1434-1441, 1986.
DOI : 10.1002/pen.760262013

C. H. Shih and L. J. Lee, Effect of fiber architecture on permeability in liquid composite molding, Polymer Composites, vol.15, issue.5, pp.626-639, 1998.
DOI : 10.1002/pc.10136

N. Takano, M. Zako, T. Yoshioka, and K. Terada, Homogenization method to predict three-dimensional permeabilities considering micro-macro and solid-fluid interactions, Proceedings of ICCM12, 1999.

Y. Henzel, J. Bréard, F. Trochu, and R. Blanlot, A standard characterization of saturated and unsaturated flow behaviours in porous media, Proceedings of ICCM12, 1999.

V. P. Stavrov, E. I. Kremenevskaya, V. V. Stavrov, and V. M. Tkachev, Effect of the structure of a fibrous layer on its permeability for a nonlinearly viscous fluid, Mechanics of Composite Materials, vol.31, issue.No. 4, pp.554-563, 1997.
DOI : 10.1007/BF02256291

B. Yu, L. J. Lee, and H. Cao, A fractal in-plane permeability model for fabrics, Polymer Composites, vol.14, issue.2, pp.201-221, 2002.
DOI : 10.1002/pc.10426

H. Darcy, Les Fontaines Publiques de la ville de Dijon, p.1856

C. Binétruy, B. Hilaire, and J. Pabiot, The interactions between flows occurring inside and outside fabric tows during rtm, Composites Science and Technology, vol.57, issue.5, pp.587-596, 1997.
DOI : 10.1016/S0266-3538(97)00019-5

C. Wu, T. J. Wang, and L. J. Lee, Trans-plane fluid permeability measurement and its applications in liquid composite molding, Polymer Composites, vol.14, issue.4, pp.289-298, 1994.
DOI : 10.1002/pc.750150407

M. A. Spaid and F. R. Phelan, Modeling void formation dynamics in fibrous porous media with the lattice Boltzmann method, Composites Part A: Applied Science and Manufacturing, vol.29, issue.7, pp.749-755, 1999.
DOI : 10.1016/S1359-835X(98)00031-1

F. R. Phelan and G. Wise, Analysis of transverse flow in aligned fibrous porous media, Composites Part A: Applied Science and Manufacturing, vol.27, issue.1, pp.25-34, 1995.
DOI : 10.1016/1359-835X(95)00016-U

T. A. Sadiq, S. G. Advani, and R. S. Parnas, Experimental investigation of transverse flow through aligned cylinders, International Journal of Multiphase Flow, vol.21, issue.5, pp.755-774, 1995.
DOI : 10.1016/0301-9322(95)00026-T

R. S. Parnas, A. J. Salem, T. A. Sadiq, H. P. Wang, and S. G. Advani, The interaction between micro- and macro-scopic flow in RTM preforms, Composite Structures, vol.27, issue.1-2, pp.93-107, 1994.
DOI : 10.1016/0263-8223(94)90071-X

C. Binétruy and J. Pabiot, Effects of fabric architectural heterogeneities on effective and saturated permeabilities in RTM, Proceedings of ICCM12, 1999.

J. G. Williams, C. E. Morris, and B. C. Ennis, Liquid flow through aligned fiber beds, Polymer Engineering and Science, vol.39, issue.6, pp.413-419, 1974.
DOI : 10.1002/pen.760140603

Y. Ma and R. Shishoo, Permeability Characterization of Different Architectural Fabrics, Journal of Composite Materials, vol.34, issue.8, pp.729-750, 1999.
DOI : 10.1177/002199839903300805

T. S. Lundström, R. Stenberg, R. Bergström, H. Partanen, and P. A. Birkeland, In-plane permeability measurements: a nordic round-robin study, Composites Part A: Applied Science and Manufacturing, vol.31, issue.1, pp.29-43, 2000.
DOI : 10.1016/S1359-835X(99)00058-5

V. H. Hammond and A. C. Loos, The effects of fluid type and viscosity on steadystate and advancing front permeability behavior of textile preforms, J. Reinf. Plast. Compos, vol.16, issue.1, pp.50-72, 1997.

W. O. Ballata and S. M. Walsh, Determination of the transverse permeability of a fiber preform, J. Reinf. Plast. Compos, vol.18, issue.16, pp.1450-1464, 1999.

T. L. Luce, S. G. Advani, G. Howard, J. , and R. S. Parnas, Permeability characterization. Part 2: Flow behavior in multiple-layer preforms, Polymer Composites, vol.14, issue.6, pp.446-458, 1995.
DOI : 10.1002/pc.750160603

L. Trevino, K. Rupel, W. B. Young, M. J. Liou, and L. J. Lee, Analysis of resin injection molding in molds with preplaced fiber mats. I: Permeability and compressibility measurements, Polymer Composites, vol.24, issue.1, pp.20-29, 1991.
DOI : 10.1002/pc.750120105

J. Bréard, A. Saouab, and G. Bouquet, Mesure de la perm??abilit?? spatiale d'un renfort tridimensionnel pour mat??riaux composites ?? matrice polym??re, The European Physical Journal Applied Physics, vol.1, issue.2, pp.269-278, 1998.
DOI : 10.1051/epjap:1998145

S. H. Ahn, W. I. Lee, and G. S. Springer, Measurement of the Three-Dimensional Permeability of Fiber Preforms Using Embedded Fiber Optic Sensors, Journal of Composite Materials, vol.29, issue.6, pp.714-733, 1995.
DOI : 10.1177/002199839502900602

T. S. Lundström, B. R. Gebart, and E. Sandlund, In-plane permeability measurements on fiber reinforcements by the multi-cavity parallel flow technique, Polymer Composites, vol.27, issue.1, pp.146-154, 1999.
DOI : 10.1002/pc.10342

T. S. Lundström, The permeability of non-crimp stitched fabrics, Composites Part A: Applied Science and Manufacturing, vol.31, issue.12, pp.1345-1353, 2000.
DOI : 10.1016/S1359-835X(00)00037-3

S. Drapier and M. R. Wisnom, Finite-element investigation of the compressive strength of non-crimp-fabric-based composites, Composites Science and Technology, vol.59, issue.8, pp.1287-1297, 1999.
DOI : 10.1016/S0266-3538(98)00165-1

S. Drapier and M. R. Wisnom, A finite-element investigation of the interlaminar shear behaviour of non-crimp-fabric-based composites, Composites Science and Technology, vol.59, issue.16, pp.2351-2362, 1999.
DOI : 10.1016/S0266-3538(99)00091-3

R. Backhouse, Multiaxial non-crimp fabrics: characterisation of manufacturing capability for composite aircraft structure applications, 1998.