U. Mohammed, C. Lekakou, and M. G. Bader, Experimental studies and analysis of the draping of woven fabrics, Compos Part A, vol.31, pp.1409-1420, 2000.

P. Ouagne, D. Soulat, and J. Moothoo, Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignment defect, Compos Part A, vol.51, pp.1-10, 2013.

S. B. Sharma, M. Sutcliffe, and S. H. Chang, Characterisation of material properties for draping of dry woven composite material, Compos Part A, vol.34, pp.1167-1175, 2003.

, Ellipse of wet fabric during in plane permeability characterisation at constant fibre volume fraction, V f ¼, vol.54

J. Wang, P. R. Page, and J. R. , The draping of woven fabric preforms and prepregs for production of polymer composite components, Compos Part A, vol.30, pp.757-765, 1999.

M. Waris, P. J. Liotier, and S. Drapier, Effect of the mold on the residual strain field monitored with optical fibers sensors in resin transfer molding processes, J Compos Mater, vol.48, pp.2589-2601, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01063663

P. J. Liotier, A. Vautrin, and P. Henrat, Microcracking of composites reinforced by multiply stitched preform subjected to cyclic hygrothermal loadings, Compos Part A, vol.42, pp.425-437, 2011.

P. J. Liotier, A. Vautrin, and C. Delise´e, 3D morphological characterization and microcracks detection in composites reinforced by multiaxial multiply stitched preform, Compos Part A, vol.41, pp.653-662, 2010.

M. R. Wisnom and C. , Modelling of splitting and delamination in notched cross-ply laminates, Compos Sci Technol, vol.60, pp.2849-2856, 2000.

E. Heardman, C. Lekakou, and M. G. Bader, In-plane permeability of sheared fabrics, Compos Part A, vol.32, pp.933-940, 2001.

B. Verleye, R. Croce, and M. Griebel, Permeability of textile reinforcements: simulation, influence of shear and validation, Compos Sci Technol, vol.68, pp.2804-2810, 2008.

L. Huber and U. , Investigation of shearing effects on the permeability of woven fabrics and implementation into LCM simulation, Compos Sci Technol, vol.63, pp.2081-2088, 2003.

Y. Hou, S. Comas-cardona, and C. Binetruy, Gas transport in fibrous media: application to in-plane permeability measurement using transient flow, J Compos Mater, vol.47, pp.2237-2247, 2013.
URL : https://hal.archives-ouvertes.fr/emse-00959603

R. Arbter, J. M. Beraud, and C. Binetruy, Experimental determination of the permeability of textiles: a benchmark exercise, Compos Part A, vol.42, pp.1157-1168, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01006842

P. S?ima´c?ek and S. G. Advani, Permeability model for a woven fabric, Polym Compos, vol.17, pp.887-899, 1996.

R. S. Parnas, J. G. Howard, and T. L. Luce, Permeability characterization. Part 1: a proposed standard reference fabric for permeability, Polym Compos, vol.16, pp.429-445, 1995.

F. Loix, P. Badel, and L. Orge´as, Woven fabric permeability: from textile deformation to fluid flow meso-scale simulations, Compos Sci Technol, vol.68, pp.1624-1630, 2008.

S. Bickerton, P. Simacek, and S. E. Guglielmi, Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part, Compos Part A, vol.28, pp.801-816, 1997.

S. B. Sharma and M. Sutcliffe, A simplified finite element model for draping of woven material, Compos Part A, vol.35, pp.637-643, 2004.

N. Hamila, P. Boisse, and S. Chatel, Semi-discrete shell finite elements for textile composite forming simulation, Int J Mater Form, vol.2, pp.169-172, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00515881

T. Gereke, O. Do¨brich, and H. Hu¨bner, Experimental and computational composite textile reinforcement forming: a review, Compos Part A, vol.46, pp.1-10, 2013.

F. Abdiwi, P. Harrison, and I. Koyama, Characterising and modelling variability of tow orientation in engineering fabrics and textile composites, Compos Sci Technol, vol.72, pp.1034-1041, 2012.

C. Lai and Y. , Model resin permeation of fiber reinforcements after shear deformation, Polym Compos, vol.18, pp.642-648, 1997.

J. Walther, P. Simacek, and S. G. Advani, The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites, Int J Mater Form, vol.5, pp.83-97, 2012.

C. Demaria, E. Ruiz, and F. Trochu, In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part I: experimental results, Polym Compos, vol.28, pp.797-811, 2007.

C. Demaria, E. Ruiz, and F. Trochu, In-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injection. Part II: prediction model and numerical simulations, Polym Compos, vol.28, pp.812-827, 2007.

F. D. Dungan, M. T. Senoguz, and A. M. Sastry, On the use of Darcy permeability in sheared fabrics, J Reinforc Plast Compos, vol.18, pp.472-484, 1999.

P. Boisse, N. Hamila, and . Vidal-salle´e, Simulation of wrinkling during textile composite reinforcement forming influence of tensile, in-plane shear and bending stiffnesses, Compos Sci Technol, vol.71, pp.683-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00730294

S. Bel, N. Hamila, and P. Boisse, Finite element model for NCF composite reinforcement preforming: importance of inter-ply sliding, Compos Part A, vol.43, pp.2269-2277, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00934514

A. A. Skordos, C. M. Aceves, and M. Sutcliffe, A simplified rate dependent model of forming and wrinkling of pre-impregnated woven composites, Compos Part A, vol.38, pp.1318-1330, 2007.

A. G. Prodromou and J. Chen, On the relationship between shear angle and wrinkling of textile composite preforms, Compos Part A, vol.28, pp.491-503, 1997.

J. Cao, R. Akkerman, and P. Boissec, Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results, Compos A, vol.39, pp.1037-1053, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01658046

D. O. Gereket and M. Hu¨bner, Experimental and computational composite textile reinforcement forming: a review, Compos A, vol.46, pp.1-10, 2013.

A. Willems, S. V. Lomov, and I. Verpoest, Optical strain fields in shear and tensile testing of textile reinforcements, Compos Sci Technol, vol.68, pp.807-819, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00550272

R. C. Gonzalez, R. E. Woods, and S. L. Eddins, Digital image processing using MATLAB, 2009.

J. M. Cardamone, W. C. Damert, and J. C. Philips, Digital image analysis for fabric assessment, Text Res J, vol.72, pp.906-916, 2002.

D. Ballard and C. Brown, Computer vision, pp.24-30, 1982.

W. A. Walbran, S. Bickerton, and P. A. Kelly, Evaluating the shear component of reinforcement compaction stress during liquid composite moulding processes, J Compos Mater, vol.47, pp.513-528, 2013.

S. Comas-cardona, B. Cosson, and S. Bickerton, An optically-based inverse method to measure in-plane permeability fields of fibrous reinforcements, Compos Part A, vol.57, pp.41-48, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01716700

S. Drapier, J. Monatte, and O. Elbouazzaoui, Characterization of transient through-thickness permeabilities of Non Crimp New Concept (NC2) multiaxial fabrics, Compos Part A, vol.36, pp.877-892, 2002.
URL : https://hal.archives-ouvertes.fr/emse-00447464

R. A. Shenoi, P. A. Wilson, and J. R. Weitzenbo¨ck, Radial flow permeability measurement. Part A: theory, Compos Part A, vol.30, pp.1685-1697, 1999.

R. Umer, S. Bickerton, and A. Fernyhough, Characterising wood fibre mats as reinforcements for liquid composite moulding processes, Compos Part A, vol.38, pp.434-448, 2007.

P. Ouagne and J. Bre´ard, Continuous transverse permeability of fibrous media, Compos Part A, vol.41, pp.22-28, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00655500

E. Swery, R. Meier, and S. Lomov, Verification of FlowTex Solver using Ansys CFX; Examining the permeability prediction method on a range of textile architecture models, Proceedings of the 16th European conference on composite materials, 2014.

E. Swery, P. A. Kelly, and W. A. Walbran, Numerical permeability prediction of woven textiles at different compaction levels, TexComp 11, 2014.

M. Pucci, P. J. Liotier, and S. Drapier, Capillary effects on flax fibers reinforcement: comparison of chemical and morphological effects on the local wetting dynamics, Proceedings of the 12th international conference on flow processing in composite materials, pp.14-16, 2014.

S. Aranda, D. C. Berg, and M. Dickert, Influence of shear on the permeability tensor and compaction behaviour of a non-crimp fabric, Compos Part B Eng, vol.65, pp.158-163, 2014.

Q. Govignon, S. Bickerton, and P. A. Kelly, Simulation of the reinforcement compaction and resin flow during the complete resin infusion process, Compos Part A, vol.41, pp.45-57, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02070802

P. Celle, S. Drapier, and J. Bergheau, Numerical modelling of liquid infusion into fibrous media undergoing compaction, Eur J Mech A/Solids, vol.27, pp.647-661, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00582044

N. Moulin, L. Abouorm, and J. Bruchon, Monolithic approach of stokes-Darcy coupling for LCM process modelling, Key Eng Mater, vol.554, pp.447-455, 2013.
URL : https://hal.archives-ouvertes.fr/emse-00959587

G. Pacquaut, J. Bruchon, and N. Moulin, Combining a level-set method and a mixed stabilized P1/P1 formulation for coupling Stokes-Darcy flows, Int J Numerical Methods Fluids, vol.69, pp.459-480, 2012.
URL : https://hal.archives-ouvertes.fr/emse-00830372