Intra-grain orientation distributions in hot-deformed aluminium: Orientation dependence and relation to deformation mechanisms

Abstract : The development of intra-grain orientation distributions is analysed for 92 individual grains of an aluminium polycrystal deformed in plane strain compression at 400 degrees C to an effective strain of epsilon = 1.2. Orientations of the crystallographic lattice were measured by using a microtexture tracking technique that combines deforming a split sample with collecting electron backscattering diffraction (EBSD) data on the internal surface at successively greater strains. In these experiments, more than 1000 orientations were taken within each of the grains at strains 0.19, 0.42, 0.77 and 1.2, as well as in the initial, undeformed state. A high-resolution finite element simulation (1000 elements/grain on average) was conducted on a polycrystal whose grains were assigned the experimental orientations. Attributes of the orientation distributions were extracted from both the experimental and simulation data, including the average disorientation angles and the preferential disorientation axes. For both experiment and simulation, the average disorientation angles were found to increase up to epsilon = 0.5 and then to saturate to values of 7-8 degrees. It is shown that the preferential disorientation axes are distributed about the transverse direction (TD) up to epsilon = 0.5 and then migrate at large strains to directions between the rolling (extension) direction (RD) and the normal (compression) direction (ND). Detailed crystal plasticity analyses show that the distribution of preferential disorientation axes is related to two mechanisms: (i) the development of anisotropy in the orientation distributions due to the accentuated activity of particular slip systems from stress heterogeneities and (ii) the peak-shifting transformation of the distribution arising from gradients of the reorientation velocity field imposed by the deformation. (C) 2015 Elsevier Ltd. All rights reserved.
Type de document :
Article dans une revue
Journal of the Mechanics and Physics of Solids, Elsevier, 2015, 84, pp.506-527 〈10.1016/j.jmps.2015.07.014 〉
Liste complète des métadonnées

https://hal-emse.ccsd.cnrs.fr/emse-01500958
Contributeur : Géraldine Fournier-Moulin <>
Soumis le : lundi 3 avril 2017 - 18:02:06
Dernière modification le : mercredi 24 octobre 2018 - 01:01:19

Identifiants

Collections

Citation

Romain Quey, Julian Haworth Driver, P.R. Dawson. Intra-grain orientation distributions in hot-deformed aluminium: Orientation dependence and relation to deformation mechanisms . Journal of the Mechanics and Physics of Solids, Elsevier, 2015, 84, pp.506-527 〈10.1016/j.jmps.2015.07.014 〉. 〈emse-01500958〉

Partager

Métriques

Consultations de la notice

45