. Bibliographie and . Baldacci, New route relaxation and pricing strategies for the vehicle routing problem, Operations Research, vol.59, issue.5, pp.1269-1283, 2011.

J. F. Bard, Assembly line balancing with parallel workstations and dead time, International Journal of Production Research, vol.8, issue.6, pp.1005-1018, 1989.
DOI : 10.1287/mnsc.30.1.85

D. Battaïa, O. Battaïa, and A. Dolgui, Reduction approaches for a generalized line balancing problem, Computers & Operations Research, vol.39, issue.10, pp.2337-2345, 2012.
DOI : 10.1016/j.cor.2011.11.022

. Battaïa, A decision support system for design of mass production machining lines composed of stations with rotary or mobile table, Robotics and Computer-Integrated Manufacturing, vol.28, issue.6, pp.28672-680, 2012.
DOI : 10.1016/j.rcim.2012.04.005

I. Baybars, A Survey of Exact Algorithms for the Simple Assembly Line Balancing Problem, Management Science, vol.32, issue.8, pp.909-932, 1986.
DOI : 10.1287/mnsc.32.8.909

C. Becker and A. Scholl, A survey on problems and methods in generalized assembly line balancing, European Journal of Operational Research, vol.168, issue.3, pp.694-715, 2006.
DOI : 10.1016/j.ejor.2004.07.023

S. Belmokhtar, Lignes d'usinage avec équipements standard : modélisation , configuration et optimisation, 2006.

C. Blum, Beam-ACO for Simple Assembly Line Balancing, INFORMS Journal on Computing, vol.20, issue.4, pp.618-627, 2008.
DOI : 10.1287/ijoc.1080.0271

F. F. Boctor, A Multiple-rule Heuristic for Assembly Line Balancing, Journal of the Operational Research Society, vol.46, issue.1, pp.62-69, 1995.
DOI : 10.1057/jors.1995.7

. Boysen, N. Fliedner-]-boysen, and M. Fliedner, A versatile algorithm for assembly line balancing, European Journal of Operational Research, vol.184, issue.1, pp.39-56, 2008.
DOI : 10.1016/j.ejor.2006.11.006

. Bibliographie and . Boysen, A classiffication of assembly line balancing problems, European Journal of Operational Research, vol.183, issue.2, pp.674-693, 2007.

. Boysen, Sequencing mixed-model assembly lines to minimize part inventory cost, OR Spectrum, vol.37, issue.82, pp.611-633, 2008.
DOI : 10.1007/s00291-007-0095-2

J. Bukchin and J. Rubinovitz, A weighted approach for assembly line design with station paralleling and equipment selection, IIE Transactions, vol.8, issue.1, pp.73-85, 2003.
DOI : 10.1080/00207548908942531

T. Bukchin, J. Bukchin, and M. Tzur, Design of flexible assembly line to minimize equipment cost, IIE Transactions, vol.32, issue.7, pp.585-598, 2000.
DOI : 10.1287/mnsc.34.2.240

L. D. Burns and C. F. Daganzo, Assembly line job sequencing principles, International Journal of Production Research, vol.30, issue.1, pp.71-99, 1987.
DOI : 10.1287/mnsc.30.1.85

. Buzacott, . Shanthikumar, J. A. Buzacott, and J. G. Shanthikumar, Stochastic Models of Manufacturing Systems, 1993.

. Cakir, Multi-objective optimization of a stochastic assembly line balancing: A hybrid simulated annealing algorithm, Computers & Industrial Engineering, vol.60, issue.3, pp.60376-384, 2011.
DOI : 10.1016/j.cie.2010.08.013

P. Caprara, A. Caprara, and U. Pferschy, Modified subset sum heuristics for bin packing, Information Processing Letters, vol.96, issue.1, pp.18-23, 2005.
DOI : 10.1016/j.ipl.2005.04.005

A. K. Chakravarty, Line Balancing With Task Learning Effects, IIE Transactions, vol.3, issue.2, pp.186-193, 1988.
DOI : 10.1111/j.1540-5915.1979.tb00026.x

S. Chakravarty, A. K. Chakravarty, and A. Shtub, Balancing Mixed Model Lines with In-Process Inventories, Management Science, vol.31, issue.9, pp.311161-1174, 1985.
DOI : 10.1287/mnsc.31.9.1161

S. Chakravarty, A. K. Chakravarty, and A. Shtub, A cost minimization procedure for mixed model production lines with normally distributed task times, European Journal of Operational Research, vol.23, issue.1, pp.25-36, 1986.
DOI : 10.1016/0377-2217(86)90211-0

W. Chiang, The application of a tabu search metaheuristic to the assembly line balancing problem, Annals of Operations Research, vol.77, issue.0, pp.209-227, 1998.
DOI : 10.1023/A:1018925411397

. Bibliographie and . Chica, Including different kinds of preferences in a multi-objective ant algorithm for time and space assembly line balancing on different Nissan scenarios, Expert Systems with Applications, vol.38, issue.1, pp.709-720, 2011.

. Corominas, Balancing assembly line with skilled and unskilled workers, Omega, vol.36, issue.6, pp.1126-1132, 2008.
DOI : 10.1016/j.omega.2006.03.003

. Daganzo, . Blumenfeld, C. F. Daganzo, and D. E. Blumenfeld, Assembly system design principles and tradeoffs, International Journal of Production Research, vol.32, issue.3, pp.669-681, 1994.
DOI : 10.1287/mnsc.35.10.1215

D. , L. Davida, G. I. Linton, and D. J. , A new algorithm for the scheduling of tree structured tasks, Proc. Conf. Inform. Sci. and Syst, pp.543-548, 1976.

. Delorme, Combinatorial design of a minimum cost transfer line, Omega, vol.40, issue.1, pp.31-41, 2012.
DOI : 10.1016/j.omega.2011.03.004

URL : https://hal.archives-ouvertes.fr/emse-00710313

S. G. Dimitriadis, Assembly line balancing and group working: A heuristic procedure for workers??? groups operating on the same product and workstation, Computers & Operations Research, vol.33, issue.9, pp.2757-2774, 2006.
DOI : 10.1016/j.cor.2005.02.027

. Dolgui, Buffer allocation in production line with unreliable machines, Journal of Mathematical Modelling and Algorithms, vol.1, issue.2, pp.89-104, 2002.
DOI : 10.1023/A:1016560109076

URL : https://hal.archives-ouvertes.fr/emse-00704538

. Dolgui, HBBA: hybrid algorithm for buffer allocation in tandem production lines, Journal of Intelligent Manufacturing, vol.30, issue.12, pp.411-420, 2007.
DOI : 10.1007/s10845-007-0030-z

URL : https://hal.archives-ouvertes.fr/hal-00387662

. Dolgui, On problem of optimal design of transfer lines with parallel and sequential operations, 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation. Proceedings ETFA '99 (Cat. No.99TH8467), pp.329-334, 1999.
DOI : 10.1109/ETFA.1999.815373

. Dolgui, A special case of transfer lines balancing by graph approach, European Journal of Operational Research, vol.168, issue.3, pp.732-746, 2006.
DOI : 10.1016/j.ejor.2004.07.025

URL : https://hal.archives-ouvertes.fr/hal-00387645

. Dolgui, Balancing of transfer lines with simultaneously activated spindles, Information Control Problems In Manufacturing 2004, pp.45-50, 2005.
URL : https://hal.archives-ouvertes.fr/emse-00708765

. Dolgui, Optimisation of multi-position machines and transfer lines, European Journal of Operational Research, vol.185, issue.3, pp.1375-1389, 2008.
DOI : 10.1016/j.ejor.2006.03.069

URL : https://hal.archives-ouvertes.fr/hal-00387679

. Dolgui, . Ihnatsenka, A. Dolgui, and I. Ihnatsenka, Balancing modular transfer lines with serial???parallel activation of spindle heads at stations, Discrete Applied Mathematics, vol.157, issue.1, pp.68-89, 2009.
DOI : 10.1016/j.dam.2008.04.020

URL : https://hal.archives-ouvertes.fr/hal-00387690

. Dolgui, . Ihnatsenka, A. Dolgui, and I. Ihnatsenka, Branch and bound algorithm for a transfer line design problem: Stations with sequentially activated multi-spindle heads, European Journal of Operational Research, vol.197, issue.3, pp.1119-1132, 2009.
DOI : 10.1016/j.ejor.2008.03.028

URL : https://hal.archives-ouvertes.fr/emse-00676013

. Dolgui, . Proth, A. Dolgui, and J. M. Proth, Les systèmes de production modernes, 2006.

T. Duran, Assembly line balancing problem with deterioration tasks and learning effect, Expert Systems with Applications, vol.37, issue.2, pp.1223-1228, 2010.

F. F. Bibliographie-[-easton-]-easton, A dynamic program with fathoming and dynamic upper bounds for the assembly line balancing problem, Computers & Operations Research, vol.17, issue.2, pp.163-175, 1990.

. Ege, Assembly line balancing with station paralleling, Computers & Industrial Engineering, vol.57, issue.4, pp.1218-1225, 2009.
DOI : 10.1016/j.cie.2009.05.014

S. Erel, E. Erel, and S. C. Sarin, A survey of the assembly line balancing procedures. Production Planning & Control : The Management of Operations, pp.414-434, 1998.

. Essafi, A reactive GRASP and Path Relinking for balancing reconfigurable transfer lines, International Journal of Production Research, vol.6, issue.4, pp.505213-5238, 2012.
DOI : 10.1023/A:1008067422364

URL : https://hal.archives-ouvertes.fr/emse-00693913

. Essafi, A MIP approach for balancing transfer line with complex industrial constraints, Computers & Industrial Engineering, vol.58, issue.3, pp.393-400, 2010.
DOI : 10.1016/j.cie.2009.04.009

URL : https://hal.archives-ouvertes.fr/emse-00672868

E. Falkenauer, Line balancing in the real world, Proceedings of the International Conference on Product Lifecycle Management PLM'05, pp.360-370, 2005.

L. Fanjul-peyro and R. Ruiz, Scheduling unrelated parallel machines with optional machines and jobs selection, Computers & Operations Research, vol.39, issue.7, pp.1745-1753, 2012.
DOI : 10.1016/j.cor.2011.10.012

H. N. Gabow, An Almost-Linear Algorithm for Two-Processor Scheduling, Journal of the ACM, vol.29, issue.3, pp.766-780, 1982.
DOI : 10.1145/322326.322335

. Gadidov, . Wilhelm, R. Gadidov, and W. Wilhelm, A cutting plane approach for the single-product assembly system design problem, International Journal of Production Research, vol.38, issue.8, pp.1731-1754, 2000.
DOI : 10.1080/002075400188564

J. Garey, M. R. Garey, and D. S. Johnson, Computers and Intractability : A Guide to the NP-Completeness, 1979.

. Garey, The Complexity of Flowshop and Jobshop Scheduling, Mathematics of Operations Research, vol.1, issue.2, pp.117-129, 1976.
DOI : 10.1287/moor.1.2.117

. Ghosh, . Gagnon, S. Ghosh, and R. J. Gagnon, A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems, International Journal of Production Research, vol.18, issue.8, pp.637-670, 1989.
DOI : 10.1080/00207548908942574

. Gökçen, Balancing of parallel assembly lines, International Journal of Production Economics, vol.103, issue.2, pp.600-609, 2006.
DOI : 10.1016/j.ijpe.2005.12.001

. Guschinskaya, . Dolgui, O. Guschinskaya, and A. Dolgui, Comparison of exact and heuristic methods for a transfer line balancing problem, International Journal of Production Economics, vol.120, issue.2, pp.276-286, 2009.
DOI : 10.1016/j.ijpe.2008.11.018

URL : https://hal.archives-ouvertes.fr/emse-00672990

. Guschinskaya, . Dolgui, O. Guschinskaya, and A. Dolgui, Equilibrage de lignes de production, Journal Europ??en des Syst??mes Automatis??s, vol.44, issue.9-10, pp.9-101081, 2010.
DOI : 10.3166/jesa.44.1079-1117

URL : https://hal.archives-ouvertes.fr/emse-00676018

. Hamta, Bicriteria assembly line balancing by considering flexible operation times, Applied Mathematical Modelling, issue.12, pp.355592-5608, 2011.
DOI : 10.1016/j.apm.2011.05.016

URL : http://doi.org/10.1016/j.apm.2011.05.016

A. Hamzadayi and G. Yildiz, A genetic algorithm based approach for simultaneously balancing and sequencing of mixed-model U-lines with parallel workstations and zoning constraints, Computers & Industrial Engineering, vol.62, issue.1, pp.206-215, 2012.
DOI : 10.1016/j.cie.2011.09.008

. Haouari, . Serairi, M. Haouari, and M. Serairi, Heuristics for the variable sized bin-packing problem, Computers & Operations Research, vol.36, issue.10, pp.2877-2884, 2009.
DOI : 10.1016/j.cor.2008.12.016

. Held, Assembly-Line Balancing???Dynamic Programming with Precedence Constraints, Operations Research, vol.11, issue.3, pp.442-459, 1963.
DOI : 10.1287/opre.11.3.442

T. R. Hoffmann, Eureka: A Hybrid System for Assembly Line Balancing, Management Science, vol.38, issue.1, pp.39-47, 1992.
DOI : 10.1287/mnsc.38.1.39

. Bibliographie and T. C. Hu, Parallel sequencing and assembly line problems, Operations Research, vol.9, issue.6, pp.841-848, 1961.

. Hwang, U-shaped assembly line balancing problem with genetic algorithm, International Journal of Production Research, vol.11, issue.16, pp.464637-4649, 2008.
DOI : 10.1080/00207548908942637

J. R. Jackson, A Computing Procedure for a Line Balancing Problem, Management Science, vol.2, issue.3, pp.261-271, 1956.
DOI : 10.1287/mnsc.2.3.261

R. V. Johnson, Optimally Balancing Large Assembly Lines with ???Fable???, Management Science, vol.34, issue.2, pp.240-253, 1988.
DOI : 10.1287/mnsc.34.2.240

A. B. Kahn, Topological sorting of large networks, Communications of the ACM, vol.5, issue.11, pp.558-562, 1962.
DOI : 10.1145/368996.369025

. Karimi-nasab, Working time evaluation in assembly lines, International Journal of Mathematics in Operational Research, vol.4, issue.1, pp.1-17, 2012.
DOI : 10.1504/IJMOR.2012.044469

D. Khan, A. Khan, and A. J. Day, A Knowledge Based Design Methodology for manufacturing assembly lines, Computers & Industrial Engineering, vol.41, issue.4, pp.441-467, 2002.
DOI : 10.1016/S0360-8352(01)00067-5

O. Kilincci, Firing sequences backward algorithm for simple assembly line balancing problem of type 1, Computers & Industrial Engineering, vol.60, issue.4, pp.830-839, 2011.
DOI : 10.1016/j.cie.2011.02.001

. Kim, A mathematical model and a genetic algorithm for two-sided assembly line balancing, Computers & Operations Research, vol.36, issue.3, pp.853-865, 2009.
DOI : 10.1016/j.cor.2007.11.003

A. Kimms, Minimal investment budgets for flow line configuration, IIE Transactions, vol.36, issue.4, pp.287-298, 2000.
DOI : 10.1287/mnsc.30.6.713

S. Klein, R. Klein, and A. Scholl, Maximizing the production rate in simple assembly line balancing ??? A branch and bound procedure, European Journal of Operational Research, vol.91, issue.2, pp.367-385, 1996.
DOI : 10.1016/0377-2217(95)00047-X

. Koren, Reconfigurable Manufacturing Systems, CIRP Annals - Manufacturing Technology, vol.48, issue.2, pp.527-540, 1999.
DOI : 10.1016/S0007-8506(07)63232-6

. Kottas, . Lau, J. F. Kottas, and H. S. Lau, A Total Operating Cost Model for Paced Lines with Stochastic Task Times, A I I E Transactions, vol.5, issue.1, pp.234-240, 1976.
DOI : 10.1080/05695557608975072

. Kovalev, Line configuration to minimize setup costs, Mathematical and Computer Modelling, vol.55, issue.9-10, pp.9-102087, 2012.
DOI : 10.1016/j.mcm.2011.12.053

URL : https://hal.archives-ouvertes.fr/emse-00710265

. Lapierre, Balancing assembly lines with tabu search, European Journal of Operational Research, vol.168, issue.3, pp.826-837, 2006.
DOI : 10.1016/j.ejor.2004.07.031

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=

. Li, Automatic generation of assembly system configuration with equipment selection for automotive battery manufacturing, Journal of Manufacturing Systems, vol.30, issue.4, pp.188-195, 2011.
DOI : 10.1016/j.jmsy.2011.07.009

. Lucertini, Modeling an assembly line for configuration and flow management, Computer Integrated Manufacturing Systems, vol.11, issue.1-2, pp.15-24, 1998.
DOI : 10.1016/S0951-5240(98)00005-6

. Lutz, Determining buffer location and size in production lines using tabu search, European Journal of Operational Research, vol.106, issue.2-3, pp.301-316, 1998.
DOI : 10.1016/S0377-2217(97)00276-2

S. Macgregor, D. Smith, and S. Daskalaki, Buffer space allocation in automated assembly lines, Operations Research, vol.36, issue.2, pp.343-358, 1988.

B. B. Malakooti, Assembly line balancing with buffers by multiple criteria optimization, International Journal of Production Research, vol.31, issue.31, pp.2159-2178, 1994.
DOI : 10.1080/00207549408957065

. Massim, Efficient combined immune-decomposition algorithm for optimal buffer allocation in production lines for throughput and profit maximization, Computers & Operations Research, vol.37, issue.4, pp.611-620, 2010.
DOI : 10.1016/j.cor.2009.06.016

F. Mcmullen, P. R. Mcmullen, and G. V. Frazier, Using simulated annealing to solve a multiobjective assembly line balancing problem with parallel workstations, International Journal of Production Research, vol.36, issue.10, pp.362717-2741, 1998.
DOI : 10.1080/002075498192454

H. Meyr, Supply chain planning in the German automotive industry, OR Spectrum, vol.26, issue.4, pp.447-470, 2004.

. Bibliographie, . Miltenburg, . Wijngaard, J. Miltenburg, and J. Wijngaard, The U-line line balancing problem, Management Science, issue.10, pp.401378-1388, 1994.

C. L. Moodie and H. H. Young, A heuristic method of assembly line balancing for assumptions of constant or variable work element times, Journal of Industrial Engineering, vol.16, issue.1, pp.23-29, 1965.

. Musharavati, . Hamouda, F. Musharavati, and A. S. Hamouda, Enhanced simulated-annealing-based algorithms and their applications to process planning in reconfigurable manufacturing systems, Advances in Engineering Software, vol.45, issue.1, pp.80-90, 2012.
DOI : 10.1016/j.advengsoft.2011.09.017

A. C. Nearchou, Balancing large assembly lines by a new heuristic based on differential evolution method, The International Journal of Advanced Manufacturing Technology, vol.8, issue.6, pp.9-101016, 2007.
DOI : 10.1007/s00170-006-0655-7

W. Nemhauser, G. L. Nemhauser, and L. A. Wolsey, Integer and combinatorial optimization, 1988.
DOI : 10.1002/9781118627372

URL : http://dx.doi.org/10.1016/s0898-1221(99)91259-2

. Nicosia, Optimally balancing assembly lines with different workstations, Discrete Applied Mathematics, vol.118, issue.1-2, pp.99-113, 2002.
DOI : 10.1016/S0166-218X(01)00259-1

URL : http://doi.org/10.1016/s0166-218x(01)00259-1

U. Özcan, Balancing stochastic two-sided assembly lines: A chance-constrained, piecewise-linear, mixed integer program and a simulated annealing algorithm, European Journal of Operational Research, vol.205, issue.1, pp.81-97, 2010.
DOI : 10.1016/j.ejor.2009.11.033

T. Özcan, U. Özcan, and B. Toklu, Balancing of mixed-model two-sided assembly lines, Computers & Industrial Engineering, vol.57, issue.1, pp.217-227, 2009.
DOI : 10.1016/j.cie.2008.11.012

T. Özcan, U. Özcan, and B. Toklu, Multiple-criteria decision-making in two-sided assembly line balancing: A goal programming and a fuzzy goal programming models, Computers & Operations Research, vol.36, issue.6, pp.1955-1965, 2009.
DOI : 10.1016/j.cor.2008.06.009

T. Özcan, U. Özcan, and B. Toklu, A tabu search algorithm for two-sided assembly line balancing, The International Journal of Advanced Manufacturing Technology, vol.17, issue.5???6, pp.822-829, 2009.
DOI : 10.1007/s00170-008-1753-5

. Pastor, Tabu search algorithms for an industrial multi-product and multi-objective assembly line balancing problem, with reduction of the task dispersion, Journal of the Operational Research Society, vol.53, issue.12, pp.531317-1323, 2002.
DOI : 10.1057/palgrave.jors.2601457

R. Pastor and L. Ferrer, An improved mathematical program to solve the simple assembly line balancing problem, International Journal of Production Research, vol.3, issue.11, pp.472943-2959, 2009.
DOI : 10.1287/opre.9.2.274

URL : https://hal.archives-ouvertes.fr/hal-00513010

. Petrovic, Job shop scheduling with lot-sizing and batching in an uncertain real-world environment, Proceedings of the 2nd Multidisciplinary International Conference on Scheduling : Theory and Applications (MISTA 2005), pp.363-379, 2005.

C. Pinedo, M. Pinedo, and X. Chao, Operations Scheduling with Applications in Manufacturing and Services, 1999.

. Pinnoi, . Wilhelm, A. Pinnoi, and W. E. Wilhelm, Assembly System Design: A Branch and Cut Approach, Management Science, vol.44, issue.1, pp.103-118, 1998.
DOI : 10.1287/mnsc.44.1.103

URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=

. Pinto, Assembly Line Balancing with Processing Alternatives: An Application, Management Science, vol.29, issue.7, pp.29817-830, 1983.
DOI : 10.1287/mnsc.29.7.817

. Pollard, Strategies for mass customization, Journal of Business & Economics Research, vol.6, issue.7, pp.77-86, 2008.
DOI : 10.19030/jber.v6i7.2447

. Rabbani, Mixed model U-line balancing type-1 problem: A new approach, Journal of Manufacturing Systems, vol.31, issue.2, pp.31131-138, 2012.
DOI : 10.1016/j.jmsy.2012.02.002

R. Bibliographie-]-radharamanan, Group technology concepts as applied to flexible manufacturing systems, International Journal of Production Economics, vol.33, pp.1-3133, 1994.

. Rekiek, State of art of optimization methods for assembly line design, Annual Reviews in Control, vol.26, issue.2, pp.163-174, 2002.
DOI : 10.1016/S1367-5788(02)00027-5

Z. Rosenberg, O. Rosenberg, and H. Ziegler, A comparison of heuristic algorithms for cost-oriented assembly line balancing, ZOR Zeitschrift f??? Operations Research Methods and Models of Operations Research, vol.1, issue.6, pp.477-495, 1992.
DOI : 10.1007/BF01416240

. Rubinovitz, J. Levitin-]-rubinovitz, and G. Levitin, Genetic algorithm for assembly line balancing, International Journal of Production Economics, vol.41, issue.1-3, pp.343-354, 1995.
DOI : 10.1016/0925-5273(95)00059-3

. Sabuncuoglu, Ant colony optimization for the single model U-type assembly line balancing problem, International Journal of Production Economics, vol.120, issue.2, pp.287-300, 2009.
DOI : 10.1016/j.ijpe.2008.11.017

M. E. Salveson, The assembly line balancing problem, The Journal of Industrial Engineering, vol.6, issue.3, pp.18-25, 1955.

. Sarin, A methodology for solving single-model, stochastic assembly line balancing problem, Omega, vol.27, issue.5, pp.27525-535, 1999.
DOI : 10.1016/S0305-0483(99)00016-X

A. Scholl, Balancing and sequencing of assembly lines, 1999.

A. Scholl and C. Becker, A note on ???An exact method for cost-oriented assembly line balancing???, International Journal of Production Economics, vol.97, issue.3, pp.343-352, 2005.
DOI : 10.1016/j.ijpe.2004.09.009

A. Scholl and N. Boysen, Designing parallel assembly lines with split workplaces: Model and optimization procedure, International Journal of Production Economics, vol.119, issue.1, pp.90-100, 2009.
DOI : 10.1016/j.ijpe.2009.01.011

. Scholl, The sequence-dependent assembly line balancing problem, OR Spectrum, vol.9, issue.3, pp.579-609, 2008.
DOI : 10.1007/s00291-006-0070-3

. Scholl, Absalom: Balancing assembly lines with assignment restrictions, European Journal of Operational Research, vol.200, issue.3, pp.688-701, 2010.
DOI : 10.1016/j.ejor.2009.01.049

A. Scholl and R. Klein, SALOME: A Bidirectional Branch-and-Bound Procedure for Assembly Line Balancing, INFORMS Journal on Computing, vol.9, issue.4, pp.319-334, 1997.
DOI : 10.1287/ijoc.9.4.319

K. Scholl, A. Scholl, and R. Klein, Balancing assembly lines effectively ??? A computational comparison, European Journal of Operational Research, vol.114, issue.1, pp.50-58, 1999.
DOI : 10.1016/S0377-2217(98)00173-8

. Shafer, The Effects of Worker Learning, Forgetting, and Heterogeneity on Assembly Line Productivity, Management Science, vol.47, issue.12, pp.471639-1653, 2001.
DOI : 10.1287/mnsc.47.12.1639.10236

. Shi, . Gershwin, C. Shi, and S. B. Gershwin, An efficient buffer design algorithm for production line profit maximization, International Journal of Production Economics, vol.122, issue.2, pp.725-740, 2009.
DOI : 10.1016/j.ijpe.2009.06.040

A. S. Simaria and P. M. Vilarinho, 2-ANTBAL: An ant colony optimisation algorithm for balancing two-sided assembly lines, Computers & Industrial Engineering, vol.56, issue.2, pp.489-506, 2009.
DOI : 10.1016/j.cie.2007.10.007

. Son, An approach to scalability and line balancing for reconfigurable manufacturing systems, Integrated Manufacturing Systems, vol.12, issue.7, pp.12500-511, 2001.
DOI : 10.1108/09576060110407815

G. A. Süer, Designing parallel assembly lines, Computers & Industrial Engineering, vol.35, pp.3-4467, 1998.

. Talbot, A Comparative Evaluation of Heuristic Line Balancing Techniques, Management Science, vol.32, issue.4, pp.430-454, 1986.
DOI : 10.1287/mnsc.32.4.430

W. Tatikonda, M. V. Tatikonda, and U. Wemmerlöv, Adoption and implementation of group technology classification and coding systems: insights from seven case studies, International Journal of Production Research, vol.27, issue.9, pp.2087-2110, 1992.
DOI : 10.1080/00207549208948139

. Bibliographie, . Thomopoulos, N. T. Lehman-]-thomopoulos, and M. Lehman, The mixed model learning curve, AIIE Transactions, vol.1, issue.2, pp.127-132, 1969.

L. Tiacci, Event and object oriented simulation to fast evaluate operational objectives of mixed model assembly lines problems. Simulation Modelling Practice and Theory, pp.35-48, 2012.

. Topaloglu, Rule-based modeling and constraint programming based solution of the assembly line balancing problem, Expert Systems with Applications, vol.39, issue.3, pp.3484-3493, 2012.
DOI : 10.1016/j.eswa.2011.09.038

J. D. Ullman, NP-complete scheduling problems, Journal of Computer and System Sciences, vol.10, issue.3, pp.384-393, 1975.
DOI : 10.1016/S0022-0000(75)80008-0

URL : http://doi.org/10.1016/s0022-0000(75)80008-0

S. Vilarinho, P. M. Vilarinho, and A. S. Simaria, A two-stage heuristic method for balancing mixed-model assembly lines with parallel workstations, International Journal of Production Research, vol.6, issue.6, pp.1405-1420, 2002.
DOI : 10.1080/00207549408957042

K. Wang, W. Wang, and Y. Koren, Scalability planning for reconfigurable manufacturing systems, Journal of Manufacturing Systems, vol.31, issue.2, pp.3183-91, 2012.
DOI : 10.1016/j.jmsy.2011.11.001

T. S. Wee and M. J. Magazine, Assembly line balancing as generalized bin packing, Operations Research Letters, vol.1, issue.2, pp.56-58, 1982.
DOI : 10.1016/0167-6377(82)90046-3

. Wei, . Chao, N. Wei, and I. Chao, A solution procedure for type E simple assembly line balancing problem, Computers & Industrial Engineering, vol.61, issue.3, pp.61824-830, 2011.
DOI : 10.1016/j.cie.2011.05.015

X. Xu, W. Xu, and T. Xiao, Strategic robust mixed model assembly line balancing based on scenario planning, Tsinghua Science and Technology, vol.16, issue.3, pp.308-314, 2011.
DOI : 10.1016/S1007-0214(11)70045-1

B. Yagmahan, Mixed-model assembly line balancing using a multi-objective ant colony optimization approach, Expert Systems with Applications, vol.38, issue.10, pp.12453-12461, 2011.
DOI : 10.1016/j.eswa.2011.04.026